Temporal fairness guarantee in multi-rate wireless LANs for per-flow protection

Wireless LAN technologies such as IEEE 802.11a and 802.11b support high bandwidth and multi-rate data transmission to match the channel condition (i.e., signal to noise ratio). While some wireless packet fair queuing algorithms to achieve the per-flow throughput fairness have been proposed, they are not appropriate for guaranteeing QoS in multi-rate wireless LAN environments. We propose a wireless packet scheduling algorithm that uses the multi-state (multi-rate) wireless channel model and performs packet scheduling by taking into account the channel usage time of each flow. The proposed algorithm aims at per-flow protection by providing equal channel usage time for each flow. To achieve the per-flow protection, we propose a temporally fair scheduling algorithm called Contention-Aware Temporally fair Scheduling (CATS) which provides equal channel usage time for each flow. Channel usage time is defined as the sum of the packet transmission time and the contention overhead time due to the CSMA/CA mechanism. The CATS algorithm provides per-flow protection in wireless LAN environments where the channel qualities of mobile stations are dynamic over time, and where the packet sizes are application-dependent. We also extend CATS to Decentralized-CATS (D-CATS) to provide per-flow protection in the uplink transmission. Using an NS-2 simulation, we evaluate the fairness property of both CATS and D-CATS in various scenarios. Simulation results show that the throughput of mobile stations with stable link conditions is not degraded by the mobility (or link instability) of other stations or by packet size variations. D-CATS also shows less delay and less delay jitter than FIFO. In addition, since D-CATS can coordinate the number of contending mobile stations, the overall throughput is not degraded as the number of mobile stations increases. This work was supported in part by the Brain Korea 21 project of Ministry of Education and in part by the National Research Laboratory project of Ministry of Science and Technology, 2004, Korea.     

用于敞开式变电站的特高压开关设备

作为1 100 kV的UHV(特高压)输电,面临技术--生态环境的巨大挑战.变电站的UHV开关装置模块,需要的是可靠、成本/效益比好、环境友好、可维护的方案.对于这些所需的参数以及技术规范的验证,采用AIS(空气隔离变电所)技术能完全满足这些需要.介绍由瓷柱式断路器、隔离开关和NCIT(非传统互感器)所组成的UHV模块.这些装置是根据模块原理预先设计好的,其中的设备间的连接肯定允许快速安装.在变电站设备控制和检测方面,模块是预制标准化.加拿大和德国的试验站对断路器、隔离开关等独立的开关元件,在1 100 kV上做BIL、SIL和工频等绝缘试验,性能表现非常优越.因为对于特高压电压等级,IEC标准至今尚未规定,所以将根据外推法和现场数据作合理解释.瓷柱式断路器采用了最新复合绝缘体技术,在安全方面有所改进.AIS方案其他的关键技术,例如环境保护和成本,在可比的功能间,根据市场估计价值,与GIS解决方法作了比较.     

Risk-informed decision-making in the presence of epistemic uncertainty

An important issue in risk analysis is the distinction between epistemic and aleatory uncertainties. In this paper, the use of distinct representation formats for aleatory and epistemic uncertainties is advocated, the latter being modelled by sets of possible values. Modern uncertainty theories based on convex sets of probabilities are known to be instrumental for hybrid representations where aleatory and epistemic components of uncertainty remain distinct. Simple uncertainty representation techniques based on fuzzy intervals and p-boxes are used in practice. This paper outlines a risk analysis methodology from elicitation of knowledge about parameters to decision. It proposes an elicitation methodology where the chosen representation format depends on the nature and the amount of available information. Uncertainty propagation methods then blend Monte Carlo simulation and interval analysis techniques. Nevertheless, results provided by these techniques, often in terms of probability intervals, may be too complex to interpret for a decision-maker and we, therefore, propose to compute a unique indicator of the likelihood of risk, called confidence index. It explicitly accounts for the decision-maker's attitude in the face of ambiguity. This step takes place at the end of the risk analysis process, when no further collection of evidence is possible that might reduce the ambiguity due to epistemic uncertainty. This last feature stands in contrast with the Bayesian methodology, where epistemic uncertainties on input parameters are modelled by single subjective probabilities at the beginning of the risk analysis process.     

Radar image texture as a function of forest stand age

Data on forest variables are required for environmental and forest management applications. Numerous authors have shown significant correlations between mean radar response intensity and forest variables (age, height or biomass) but few studies have explored the spatial characteristics of the radar response for varying forest states. In this Letter, variation in the most commonly used texture features is shown as a function of an indicator of forest growth (age) for a controlled homogeneous test site (monospecific, even‐aged forest, with identical sylvicultural practices and a sampling that covers all forest stages from sowing to harvest). Significant linear relationships between some texture features and stand age are observed. Moreover, the quality of some fits indicates that texture could be used instead of the usual intensity–age relationships that saturate for mature stands.     

Pulsed Eddy Current Technology: Characterizing Material Loss with Gap and Lift-off Variations

Abstract

Ownership costs of operational aircraft have increased steadily over the years. One of the major cost drivers is structural deterioration due to corrosion. Beyond the economics, finding and characterizing corrosion is essential for the continued airworthiness of aircraft fleets. To this end, the pulsed eddy current technique holds the potential of becoming the primary means of detecting corrosion in multilayered structures. Its wide-band frequency spectrum allows the determination of a large number of parameters, such as defect size and location. Pulsed eddy current is still considered an experimental nondestructive technique because of realistic inspection problems (e.g., probe tilting, protrusion of rivets, and thickness variations in adhesive and paint) have not been addressed in the past. Recent advances change this situation and allow pulsed eddy current to be a credible field technique.     

Scattering from several test-objects computed by 3-D hybrid IE/PDEmethods

The electromagnetic scattering from composite anisotropic dielectric and conducting structures is modeled by hybrid partial differential equation-integral equation formulations. We emphasize the role of edge elements for both the partial differential equation and the integral equation discretization and for the coupling of the two. Numerical results from the various formulations are presented and measurements are compared in order to obtain test cases for the development and validation of numerical methods     

Fictive temperature measurement of single-mode optical-fiber coreand cladding

The fictive temperatures of single-mode optical-fiber core, along with its inner and outer cladding, were measured using an infrared (IR) reflection method on the fiber cross-sectional surface. To allow for usage of a larger IR beam size than the diameter of the fiber core, the cross-sectional area of the fiber was increased by slicing the fiber at an oblique angle, along approximately 3° off the fiber axis direction. The magnitude of the fictive temperature was estimated from the IR peak wavenumber-fictive temperature relation obtained for bulk glasses with the same compositions. The observed fictive temperature was in the range of 1150~1300°C for the core, 1450~1550°C for the inner cladding, and 1620~1660°C for the outer cladding and exhibited good correlation with the fiber cooling rate     

High temperature lithium cells using conversion oxide electrodes

Oxidized stainless steel electrodes containing chromium oxides without any conducting additives or binder have been successfully cycled at high temperatures (up to 100 °C) in organic solvent-based electrolytes with high reversibility. Cycling at high temperature results in an enhancement of the capacity at lower voltages, which is maintained upon cycling. After studying different electrolyte candidates, the best results were obtained using lithium bis(trifluoromethanesulfonyl)imide (LiTFSI) dissolved in ethylene carbonate.     

Effects of polypyrrole modified electrode functionalization on potentiometric pH responses

Two functionalized polypyrrole films, poly(11-N-pyrrolylundecanoic) acid and poly(N-undecylpyrrole), were used as sensitive layers for pH sensors. The functionalized pyrrole monomers were first synthesized before carrying out their electropolymerization onto non-oxidizable electrodes. The deposits were characterized by SEM imaging, XPS and PM-IRRAS to study surface structure and composition. Poly(11-N-pyrrolylundecanoic) acid coating yielded very promising results as sensitive layer in pH sensors. Indeed, the potentiometric responses from pH 4.0 to 9.0 appeared linear, reversible, stable in time over a period of 1 month and highly selective for H⁺ ions. This behavior was attributed to carboxylic acid groups which are sensitive to proton concentration changes. This was confirmed by the fact that poly(N-undecylpyrrole) film led to potentiometric responses being pH dependent only from pH 6.0 to 9.0 with low sensitivity. Poly(11-N-pyrrolylundecanoic) acid is thus promoted to be used as sensitive layer in pH sensors.